Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Washington Heights
Dryer vent cleaning in Washington Heights isn’t a suburban job, and we don’t treat it like one. This is a neighborhood of pre-war elevator co-ops and six-story walk-ups, where your dryer exhaust often ties into a shared building riser instead of running straight to an outside wall. That changes what cleaning involves: we trace the run, work around co-op board access, and check what’s happening above your apartment, not just behind your machine. Call (844) 702-0856 and we’ll set up a free estimate. Our technicians have up to 9 years of experience with exactly these buildings.

Why Washington Heights Homeowners Call Air Duct Cleaning Bedford Park for Dryer Vent Cleaning
Most air duct companies treat dryer vents as an add-on. Here, it’s a core service, and it’s done with the same equipment we use for duct work: Rotobrush contact cleaning, Nikro HEPA source removal, and Abatement Technologies air filtration running during the job. That matters in a tight apartment where lint gets dislodged in a hallway closet and has nowhere to go.
We know the buildings along Fort Washington Ave, St. Nicholas Ave and Broadway, and we know that reaching a shaft or a roof termination usually means talking to a super before we talk to a machine. We coordinate that part, because a half-cleaned run isn’t worth doing. Residents across Washington Heights call us because we show before-and-after photos of their own vent, so they can see the lint that came out rather than take our word for it.
Questions? Call (844) 702-0856. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Dryer Vent Cleaning Services in Washington Heights
We handle the full set of dryer vent services in Washington Heights. Here’s what each one involves in this building stock.
Dryer Vent Inspection
In Washington Heights co-ops, an inspection means more than a look at the lint trap. We run a camera down the lint pathway to find where the run turns, whether it joins a shared riser, and where lint has packed into the elbows. This is how we map the scope before any agitation begins, and it tells you whether the job stops at your wall or continues up the chase.

Vent Cleaning
Cleaning a dryer vent in an older Washington Heights building means source removal under negative pressure, with agitation tools working the lint loose while the air stays filtered. We confirm airflow at the exterior cap, because a clean run that still can’t push air out is a vent that will clog again. Every job is one flat price per system, agreed before we start, and you get before-and-after photos of the run we actually cleaned.

Lint Removal
Lint is what makes dryer vents a fire-safety concern, and in shared Washington Heights chases it piles up in places a homeowner can’t see. We remove compacted lint from the transition behind the machine, the elbows, and any flex run that’s collected debris over the years. When a long foil transition has kinked or collapsed, we say so and explain the fix.

Vent Rerouting
Rerouting is the answer when a dryer run was tapped into a building riser without proper documentation, or when a foil transition has been crushed behind the machine for too long. A local pro can reconnect the dryer to a smooth rigid or semi-rigid duct that actually exhausts where it should. In a co-op, that sometimes means involving the board, and we’ll tell you up front when the job crosses that line.
If you want the wider picture on ducts and air quality while we’re there, our dryer vent cleaning team can talk through the rest of the system.
Trusted Brands We Service in Washington Heights
We use Rotobrush and Nikro for cleaning, Abatement Technologies for air scrubbing during the job, and we work with Honeywell and Aprilaire air quality systems when a customer wants filtration or humidity control addressed alongside the vent work. We’re familiar with Guardsman products too. These are established names in filtration and remediation, and we use them because lint removal in a stacked building demands controlled capture, not a shop vac and a hose. No parts inventory on hand, but we’ll tell you what equipment is coming and why.

Common Dryer Vent Cleaning Problems We See in Washington Heights Homes
The issues here look different from a house with a basement and a short exhaust run. Most of what we find traces back to the building itself.
- Vents joined into a shared riser without documentation. Lint from one unit’s dryer collects in a chase serving several apartments, and nobody knows who’s responsible for cleaning it. We map the run first so the scope is clear before work starts.
- Co-op board or super delays on shaft and roof access. The interior portion gets cleaned while the riser or roof termination sits untouched, which leaves the job half-done. Coordinating access early is often the bigger hurdle than the cleaning itself.
- Asbestos-wrapped duct insulation in pre-war buildings. Older buildings frequently contain this, and it has to be tested before any agitation. That stalls the job right where cleaning would begin, so we flag it before scheduling.
- Collapsed foil transitions and buried wall sleeves. A dryer takes two cycles because the flap at the termination never fully opens, and the cause is often a kinked foil run behind the machine. Source removal plus a proper rigid transition fixes what a cleaning alone can’t.
A dryer that’s begun taking two cycles to dry a load is the usual signal. The interior air in these buildings gets dry in winter from steam-heat radiators, and neighbors run window and portable units that recirculate dust, so a clogged vent compounds a problem that’s already in the air. When a camera inspection goes down the lint pathway, it typically finds compacted lint at the elbows of a long flex run or a termination flap that never fully opens because it’s buried behind a wall sleeve. The cause is usually years of accumulation plus an undersized or kinked transition, and a qualified technician performs source removal under negative pressure, reconnects smooth rigid or semi-rigid duct, and confirms airflow at the exterior cap.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Washington Heights, NY
Honest ranges for this neighborhood, based on typical jobs in the building stock here. A written estimate sets the final price, and there’s no per-vent pricing and no teaser coupon that balloons on site.
- Dryer vent inspection (camera): typically $95 to $175 in Washington Heights
- Standard vent cleaning, single unit with an accessible run: typically $150 to $275
- Deep lint removal on a long or riser-connected run: typically $250 to $450
- Vent rerouting or a rigid transition replacement: typically $300 to $700, more when a co-op board or shaft access is involved
- Bird guard or vent cap replacement at a roof termination: typically $125 to $300
Shared risers, roof access and asbestos testing push a job toward the higher end. Single-unit runs with a straight shot to an exterior wall sit at the lower end. Call (844) 702-0856 for a free estimate.
We Also Serve Cities Near Washington Heights
We work across the surrounding blocks as well: Highbridge, University Heights, Inwood and Concourse. Same building types, same shared risers, same access questions. If you’re in Washington Heights or anywhere along that stretch, the process is the same from the first call.
Serving Washington Heights, NY – Our Local Coverage Area
We serve Washington Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Washington Heights
Often yes, but only after we’ve mapped where your unit’s run joins the chase. A camera inspection shows whether the clog sits in your portion of the run or in the shared section above, and that determines whether other units are affected. If it’s shared, we’ll explain what needs coordinating before any work begins. Call (844) 702-0856 for an exact quote; estimates are free.
It can pause the job, not cancel it. Asbestos-wrapped duct insulation is common in pre-war buildings and has to be tested before any agitation disturbs it, so the cleaning waits until that’s settled. We flag it during the inspection so you’re not surprised mid-job. Call (844) 702-0856 to talk through your building.
Usually because lint has packed into the elbows of a long flex run or the termination flap isn’t opening fully. In walk-ups, the run is often longer and bends more than in a single-family home, which gives lint more places to collect. A camera inspection finds the restriction, and source removal clears it. Call (844) 702-0856 for an exact quote; estimates are free.
Yes, provided we can get roof access through the building. Bird guards and vent caps are a common fix here, and replacing a damaged cap restores proper airflow at the termination. Access is usually arranged with the super, so expect that step. Call (844) 702-0856 and we’ll walk through the building requirements.
It’s often the biggest variable. Board and super approval for shaft or roof access can take time, and the work can’t be completed until it clears. We’ll tell you up front what approvals your building needs so you can start that conversation early. Call (844) 702-0856 for a free estimate.
Book Dryer Vent Cleaning in Washington Heights
If your dryer is taking two cycles, or you’ve never had the vent looked at since moving into your co-op, call (844) 702-0856 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, agreed before work starts, and before-and-after photos of your own vent when we’re done. We seal it, not just clean it, and we’ll tell you exactly what equipment we’re bringing into your building.
Written by the team at Air Duct Cleaning Bedford Park.