Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Washington Heights, NY
We provide independent Lennox air duct cleaning across Washington Heights, and the one thing that makes our Lennox work here different is this: most of the equipment sits inside shared risers and through-wall sleeves, not single-family trunk-and-branch ducts. That changes how we inspect, clean and seal every job. We know the Lennox lineup from the Dave Lennox Signature Collection down to older Merit units still running in pre-war conversions, and we know what dense apartment-building service demands. Call (844) 702-0856 for a free estimate on your Washington Heights Lennox system.
Key takeaways: independent Lennox service, remediation-grade equipment (Rotobrush, Nikro, Abatement Technologies), a video inspection that maps the chase before work begins, and one flat price per system agreed before anything is opened.
Why Washington Heights Residents Choose Us for Lennox Service
Lennox equipment is particular. Variable-speed blowers, communicating controls and matched coil assemblies all behave differently when the air feeding them is dirty, and dense apartment buildings make that dirt arriving faster than in a house. We work on Lennox every week and diagnose by pattern, not by guesswork. That matters in a Washington Heights co-op where the air handler is buried in a closet and the supply run disappears into a shared vertical chase.
We use quality parts that fit the equipment: OEM Lennox filters, blower wheels and coil assemblies where fit and communicating controls demand it, and quality aftermarket equivalents for standard flex duct, mastic and hardware. Scheduling in Washington Heights starts with a conversation about your building: who the super is, what the co-op board expects before work, and which unit owns which run. We’re Washington Heights‘ independent Lennox resource, and we’re clear that we’re not a Lennox dealer.
Our technicians have up to 9 years of experience with this equipment in exactly this kind of building.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Washington Heights
These are the Lennox failure patterns we see most often in Washington Heights apartments, and each one connects to how these buildings actually run.
- Variable-speed blower wheels packed with brick and plaster dust. Lennox Merit and Signature air handlers pull fine masonry dust out of pre-war risers until the blower wheel and evaporator coil coat over and airflow drifts. Static pressure climbs, the system works harder, and the apartment cools unevenly.
- Through-wall and PTAC-style Lennox units choking on courtyard pollen. Units in apartment sleeves near Fort Tryon and the park edges recirculate seasonal pollen and dust, clogging filters and condenser coils faster than the service schedule assumes.
- Kinked or separated flex-duct runs from apartment renovations. Lennox flex runs added during a reno often pinch in tight vertical chases, leaking supply air into shared shafts and robbing the unit of delivered air.
- Older Lennox gas furnaces drawing lint through a shared return path. In converted pre-war units where the return shares a riser, lint and dryer exhaust residue collect in the blower compartment, and that raises a safety question worth checking.
- Coils and blowers never actually cleaned, just “blown out.” Source removal with Nikro HEPA equipment and contact cleaning with the Rotobrush system is what clears a packed coil. Loosened dust that is not captured just resettles.
Gas-fired Lennox equipment and any work around a shared return deserves a trained professional. We check the heat exchanger and flue path before we clean near them, and we flag anything that looks compromised.
Lennox Service in Washington Heights: What Local Conditions Mean for Your Equipment
Many Washington Heights pre-war co-ops have no individual ductwork at all. The Lennox equipment in a unit ties into a shared vertical riser or a through-wall sleeve, so a video inspection has to trace whose chase a run actually belongs to before any cleaning or sealing gets approved. That is the reality along Fort Washington Ave and St. Nicholas Ave as much as on Broadway, where six-story walk-ups and large 1920s-30s complexes stack unit after unit on the same shaft. A Lennox air handler in one of these apartments often loses airflow not from a failed part but from a blower wheel and coil packed with plaster dust and park pollen drawn through a shared riser. A technician typically starts with a video inspection to map the chase, confirms the asbestos-wrapped insulation question with the building, then cleans the coil, blower and supply/return runs and seals separated flex joints. Where an illegal dryer or kitchen exhaust is tapped into the same riser, the fix is rerouting that connection before cleaning, which usually needs super and co-op board sign-off first.
Lennox Models & Products We Service in Washington Heights
We service the full range of Lennox equipment you’ll find in Washington Heights apartments: Dave Lennox Signature Collection SL and XC series air conditioners and heat pumps, Merit Series ML, 13ACX and EL units, Lennox Complete Heat and older G-series gas furnaces in pre-war conversions, and LRP and MP series through-wall and PTAC-style units in apartment sleeves. Diagnosis draws on pattern recognition across that whole lineup rather than a single model. We’re an independent Lennox service provider, not manufacturer-affiliated or authorized, so our parts choices are made to fit and last. When a clean, sealed system in a pre-war apartment is worth keeping, we say so. Replacement only comes up when the coil or heat exchanger is compromised and repair cost approaches the value of the equipment.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Washington Heights
Pricing is per job, set by a written estimate after we’ve inspected the system. What drives cost in Washington Heights is access and scope: how many units we’re working in, how far the chase runs, whether the co-op board requires work staged around building schedules, whether asbestos-wrapped insulation needs testing first, and whether a separated flex run needs sealing as well as cleaning. Full System Cleaning, Video Inspection and Duct Sealing are three of our core services, and a combined visit is priced as one job rather than stacked line items.
Your estimate includes the inspection findings, the equipment we’ll bring (ask us what equipment we’re bringing), and before-and-after photos of your own ducts so you can see what came out. The estimate is free. Call (844) 702-0856 to set one up.
Serving Washington Heights, NY – Our Local Coverage Area
We serve Washington Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Washington Heights
Usually yes, or at minimum a conversation with the building super. Because most Washington Heights Lennox systems tie into shared risers or sleeves, the board often wants to know whose run is being opened and what gets resealed. We coordinate with the super and board as part of scheduling.
Not until the insulation is tested, and that’s the honest answer. Pre-war Washington Heights buildings frequently contain asbestos-wrapped duct insulation, and disturbing it is a health risk. We confirm the testing question with the building before any duct is opened, then proceed once it’s cleared.
Because a surface wipe of the coil and blower isn’t a real clean. If the dust source is a shared riser, it returns fast unless the run is HEPA-captured, the coil and blower are contact-cleaned, and separated flex joints in the chase are sealed. We seal it, not just clean it.
Often, yes. A sleeve-mounted LRP or MP unit recirculates courtyard pollen and park dust and clogs quickly. Cleaning the coil, filters and fan on a proper schedule usually extends its life well past replacement.
Yes. Buildings mix equipment, and a riser serving several units gets cleaned as one job where access allows. We’re an independent Lennox specialist, but the cleaning itself works the same on other brands sharing the chase. Call (844) 702-0856 for an exact quote. Estimates are free.
Service Areas Near Washington Heights
We also work in Bedford Park, Fordham, Tremont, Kingsbridge, Spuyten Duyvil and University Heights, plus nearby Highbridge. The same shared-riser and pre-war building realities apply across these neighborhoods, so scheduling and inspection work much the same way.
Book Your Lennox Service in Washington Heights Today
If your Lennox system sits on a shared riser or a sleeve, the inspection is where the value starts. Call (844) 702-0856. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll set up a free estimate and walk you through what your Washington Heights system actually needs.
Written by the team at Air Duct Cleaning Bedford Park.