Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Bedford Park?
Duct repair and sealing in Bedford Park typically runs $280 to $450 for a small number of accessible leaks, $550 to $1,100 for a whole-home sealing job on an average house, and $1,200 to $2,800 or more when disconnected runs, crushed flex sections, or hidden leaks in walls and ceilings have to be opened up and rebuilt. The written estimate you get after an inspection sets the final price, and it’s free to ask for one.
Most homes here fall in that middle band. A single-family house in Bedford Park with original galvanized trunk lines and a handful of loose joints is usually a half-day job with a mastic-and-mesh repair and a pressure check. A prewar apartment with flex duct tucked above a drop ceiling is a different animal, and that’s exactly why we look before we quote. Our technicians have up to 9 years of experience, and we work with Rotobrush contact-cleaning equipment, Nikro HEPA source-removal tools, and Abatement Technologies air filtration so the repair doesn’t just move dust around the apartment.
If you’re starting from a system that’s never been cleaned, it usually makes sense to do both. Read our air duct cleaning Bedford Park guide first if you’re weighing cleaning against repair, or call (844) 702-0856 and we’ll tell you which one your ducts actually need.
Key Takeaways
- Typical range for most Bedford Park homes: $550 to $1,100 for whole-home sealing, $280 to $450 for small spot repairs.
- Leaks you can reach and see are the cheapest to fix. Leaks hidden behind drywall, above a drop ceiling, or in a mechanical chase add time and materials.
- West-facing apartments and top-floor units in Bedford Park take the biggest heat swings, and that’s where flex duct tends to fail first.
- We seal it, not just clean it. Repair and sealing is a named service, not a line item tacked onto a cleaning invoice.
- Free estimates, upfront pricing, and a written scope before any work begins.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s how the line items usually shake out for Bedford Park homes. These are typical ranges, not exact prices. Every house is different, and the estimate you get in writing is what you’ll actually pay.
| Line item | Typical range |
|---|---|
| Diagnostic inspection and leak test (with report) | Included free with any repair estimate |
| Spot repair of 1-3 accessible leaks (mastic and mesh) | $280 – $450 |
| Whole-home joint sealing on an average house | $550 – $1,100 |
| Reconnecting a single disconnected or collapsed run | $350 – $700 |
| Replacing a crushed flex duct section (per run) | $400 – $850 |
| Duct cleaning before sealing (per system) | $450 – $1,200 |
| Sanitizing after cleaning and repair | $280 – $650 |
| Insulation wrap or wrap repair on exposed runs | $150 – $450 |
| Rebuilding a duct run behind drywall or a drop ceiling | $800 – $2,200+ |
| Full system repair and sealing on a larger home with hidden leaks | $1,200 – $2,800+ |
What pushes a job toward the top of these ranges? Access, first and foremost. A duct run that’s open and reachable from a basement or utility closet is a quick, tidy repair. A run that’s buried above a drop ceiling in an apartment in Bedford Park with a low ceiling takes two people, drop cloths, and a lot more time. Older duct systems that never had proper sealing at the joints add labor because every joint gets cleaned, primed, and sealed with mastic rather than a quick tape wrap that fails the next season. And if the ducts haven’t been cleaned in years, we’ll recommend cleaning before sealing, because sealing a dirty system just locks the debris in place.
One more cost driver worth naming: the type of sealant. A proper job uses mastic, fiberglass mesh on larger gaps, and metal tape on rigid joints. It’s not just a spray can of the same stuff you’d buy at a hardware store. Remediation-grade materials hold up to the heat cycling through the system and don’t peel after a couple of summers.
What Affects Duct Repair & Sealing Pricing in Bedford Park
- Access to the duct run. Leaks in a basement or utility closet are the cheapest to fix. Leaks above a drop ceiling, behind drywall, or inside a mechanical chase add time and sometimes drywall repair on top of the duct work. If we have to open a wall, you’ll know in the estimate.
- Duct material and system age. Older galvanized trunk lines with taped or friction-fit joints need more careful prep than newer rigid duct. Flex duct that’s been crushed or torn tends to need replacement rather than repair, which changes the math. Homes along the streets near Bronx Park and around the Bedford Park Boulevard corridor often have duct systems that were sealed with tape decades ago, and that tape has dried out and let go.
- Hidden leaks versus visible leaks. If we can find a leak with the system pressurized, we can usually fix it without opening anything. If it’s behind a wall, that’s a bigger scope, a bigger invoice, and something you should always see in writing before work starts.
- System size and number of runs. A compact two-bedroom apartment seals in a fraction of the time of a three-story house. More runs means more joints, more sealing, and more labor.
- Whether cleaning comes first. Sealing over dust and debris just traps contaminants. If the ducts haven’t been cleaned in years, our estimate will usually include cleaning, sanitizing, and then repair and sealing as a sequence, not as separate visits you have to schedule yourself.
- Whether you want air quality hardware added. If you’re already doing the work, adding a Honeywell or Aprilaire filtration or humidity system at the same time means one visit and one company instead of two contractors and two mobilization fees. It’s not required, but it’s the kind of thing to ask about while we’re already in the system.
One local climate note worth knowing. Bedford Park summers are humid enough that duct systems running through unconditioned spaces pick up condensation, and that moisture works its way into seams and insulation. Over time that’s what turns a small leak into a bigger one, and it’s the reason repair and sealing tends to come up more often after a humid stretch than after a dry one. If your ducts run through a space like that, it’s worth looking at more than just the visible leaks.
Why we quote per job instead of per foot
Per-foot pricing for duct repair sounds clean, but it hides the thing that actually drives labor: how hard each run is to reach. A 12-foot run that’s wide open takes less time than a 6-foot run jammed above a soffit. We quote the job after we’ve seen it, and the estimate is itemized so you can see what’s repair, what’s cleaning, and what’s optional.
How to Save on Duct Repair & Sealing in Bedford Park
The best way to keep the bill down is to catch leaks before they damage the system. Most of the cost in the higher ranges above comes from access and from repairing damage that was preventable. A few practical habits that pay off:
- Know the early warning signs. Uneven room temperatures, whistling at the grilles, visible dust streaks around supply registers, or a musty smell when the system kicks on are all signals to get an inspection before the leak grows.
- Don’t let a small leak run a full season. A tiny leak at a joint loses air and pulls in dust and moisture. Repairing it in the shoulder season is almost always cheaper than repairing it after the insulation behind it has failed.
- Do cleaning and sealing in the same visit. Scheduling them separately means mobilizing twice. One visit with the right equipment handled together is more efficient, and pricing reflects that.
- Ask about the full estimate before you say yes. Free estimates aren’t a gimmick for us. We’d rather you understand the scope than feel pressured into a number. Call (844) 702-0856 and we’ll walk you through what a realistic range looks like for your home.
- Consider the whole system when you’re already doing the work. If the ducts are open and accessible, adding filtration hardware from Honeywell or Aprilaire, or addressing dryer vent cleaning at the same time, reduces the number of times you have a contractor in your home. That’s not a discount pitch, it’s just scheduling efficiency.
One thing to be careful about: the lowest bid on duct repair and sealing in Bedford Park is often the bid that skips the inspection, uses tape instead of mastic, and makes no attempt to capture the dust it disturbs. That’s the kind of job that costs more six months later. Our positioning starts with equipment. We use Rotobrush contact-cleaning tools, Nikro HEPA source-removal equipment, and Abatement Technologies air filtration during the work, so the duct debris that gets loosened is captured rather than spread through the living space.
What to ask any company before you hire
If you’re comparison shopping, ask these questions of every company you talk to. The answers tell you more about the job than any review does.
- What equipment are you bringing into my home? If the answer is a shop vac, that’s a red flag.
- Will you use HEPA capture during the work, or just during the cleaning?
- What kind of sealant are you using, and is it rated for duct temperatures?
- Will you pressure-test the system before and after?
- Is the estimate itemized, or a single number?
Ask us what equipment we’re bringing. We’re comfortable answering that question, and you should expect it from anyone you let into your home. For a full look at how we approach the repair side specifically, see our page on duct repair & sealing.
FAQs – Duct Repair & Sealing Cost in Bedford Park
How much does duct repair cost in Bedford Park?
Duct repair in Bedford Park typically runs $280 to $450 for a few accessible leaks and $1,200 to $2,800 or more for a full system with hidden leaks or disconnected runs. The written estimate sets the number. Call (844) 702-0856 for a free estimate.
Is duct sealing cheaper than duct replacement?
Yes. Sealing the existing system is almost always cheaper than replacing ductwork. A whole-home sealing job usually runs $550 to $1,100, while replacing duct runs behind walls or in a mechanical chase can climb into the thousands. Repair and sealing is usually the right first step unless a run is crushed, disconnected, or contaminated past what cleaning and sealing can fix.
Can you come today?
Often yes. We offer same-day service and fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. Call (844) 702-0856, we answer 24/7, and we’ll tell you when the next opening is.
Do I need duct cleaning and duct sealing together?
Usually yes if the ducts haven’t been cleaned in recent years. Cleaning without sealing leaves leaks that let debris back in, and sealing without cleaning traps dust in the system. A combined job in Bedford Park typically runs $800 to $1,800, depending on system size and access.
How long does duct repair and sealing take?
A spot repair takes a couple of hours. Whole-home sealing on an average Bedford Park house usually runs a half-day to a full day, and larger jobs with hidden leaks can run into a second visit. We give you a time window with the estimate so you can plan around it.
What equipment should I expect a duct repair company to bring?
You should expect a HEPA-qualified vacuum for source removal, a contact-cleaning tool like the Rotobrush system for the interior walls of the duct, and air scrubbing equipment to capture anything loosened during the work. We use equipment from Rotobrush, Nikro, and Abatement Technologies because it’s the same class of gear remediation contractors use, and it’s the standard the job deserves. If a company can’t name the equipment they’re bringing, ask why.
Do you work on duct systems in apartments as well as houses?
Yes. We work on residential and light-commercial systems, and that includes the compact duct layouts common in Bedford Park apartments. Access above drop ceilings takes extra care and sometimes extra time, and the estimate reflects that. Call (844) 702-0856 to talk through your setup.
What Happens When You Call
We start with a phone conversation, then schedule a free estimate. The technician inspects the system, finds the leaks, and gives you an itemized written estimate. No service-call fee, no dispatch fee, no surprise add-ons. You decide what to approve. When the work happens, we bring the full kit: Rotobrush contact cleaning, Nikro HEPA capture, Abatement Technologies air scrubbing during the job, and mastic and mesh sealing rated for duct temperatures. If a filtration upgrade from Honeywell or Aprilaire makes sense, we’ll quote it separately so you can choose.
If you’re in Bedford Park and you’ve been putting off an inspection, the free estimate is the easy next step. Call (844) 702-0856 to book one. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If the system is failing on a Saturday, call anyway and we’ll book you into the next opening on Sunday.
Pricing reflects the Bedford Park market as of 2026. Air Duct Cleaning Bedford Park offers free estimates – call (844) 702-0856.
Written by the team at Air Duct Cleaning Bedford Park.
What Our Customers Say
"Two guys, about three hours, plastic down at every register, and they wiped the vent covers before putting them back."
- Daniela Hernandez"Quoted per system rather than the bait and switch per vent pricing everybody else in town uses. The number I was told on the phone was the number on the invoice."
- Tracy Reed"My wife's allergies had been bad in this house since we moved in. It's been two months since they did the ducts and it's noticeably better. Not a miracle, but real."
- Jeff Gallagher