Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Inwood
If your kitchen exhaust feels weak, dust keeps settling on the cabinets, or you can hear air moving behind the wall where it shouldn’t, the ductwork itself is usually the problem. We handle duct repair and sealing for Inwood apartments and houses, and we work with the shared chases and stacks that older buildings here depend on. Getting to Inwood is straightforward for our technicians, who have up to 9 years of experience and know these buildings from the riser up. Call (844) 702-0856. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Inwood Homeowners Call Air Duct Cleaning Bedford Park for Duct Repair & Sealing
Most of the work we do in Inwood isn’t in suburban ranches with a single trunk line. It’s inside six-story brick walk-ups and elevator apartments where the ducts run vertically through the building and tie units together. That changes the job entirely, and it’s the reason people call us instead of a general handyman.
We use Rotobrush contact-cleaning equipment and Nikro HEPA source-removal tools, and we run Abatement Technologies air filtration during the work so dislodged dust and grease debris are captured rather than pushed into your neighbor’s kitchen. You get one flat price per system agreed before work starts, before-and-after photos of your own ducts, and a written estimate that sets the final price. When you’re deciding who to let into a co-op, ask what equipment the company is bringing. It’s a fair question.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Inwood
We seal it, not just clean it. The work below is what we do most in Inwood’s older housing stock, and each one starts with a camera inspection so you can see what we see.
Duct Sealing
Sealing is the repair most Inwood apartments actually need. Original tin and galvanized rectangular ductwork from the 1920s through the 1940s develops seam separation and pinhole leaks, and every one of those leaks defeats the exhaust fan you’re relying on. We close the leaks at the joint, not with tape that fails in a season.

Metal Duct Repair
Metal repair addresses the physical failures: disconnected sections, crushed runs, corrosion at the seams, and joints that have pulled apart inside the chase. In Inwood walk-ups this often means the riser serving the kitchen exhaust, which is why we isolate the shared stack before we touch anything. If a fire damper sits in that assembly, we check it while we’re in there.

Flex Duct Repair
Newer units in Inwood, and the connections running from the air handler to the register, often use flex duct. It kinks, sags, and tears at the collar. We replace or re-secure the failed section and make sure the run is supported so it doesn’t collapse again behind the ceiling.

Duct Insulation
Duct runs that pass through unheated shafts or along exterior walls lose heat before the air reaches the room. We add insulation to those runs so the supply air arrives at temperature and the system doesn’t overwork to compensate. In buildings where street-facing louvers pull in cold winter air and road-salt dust off the Henry Hudson Parkway, insulated and sealed joints hold up better through the season.
Trusted Brands We Service in Inwood
We work with Rotobrush, Nikro, and Abatement Technologies equipment, and we’re familiar with Honeywell and Aprilaire air quality systems, plus Guardsman. That matters if you’re thinking past this one repair. Sealing and repairing ducts is the foundation, and filtration or humidity control only works when the ducts actually hold air. We don’t stock parts locally, so any component a job needs is sourced for that job. Five services run through one company: air duct cleaning, dryer vent cleaning, HVAC cleaning, duct repair and sealing, and air quality and sanitizing. You won’t need a second contractor to finish the system.

Common Duct Repair & Sealing Problems We See in Inwood Homes
- Shared exhaust stacks that migrate grease dust. In Inwood’s pre-war blocks, the kitchen exhaust riser often serves several apartments off one stack. Without isolating that stack first, a repair in one unit can change draft and push decades of grease dust into the kitchens above and below.
- Seam separation in original galvanized ductwork. The rectangular tin runs in 1920s-1940s buildings open up at the seams and develop pinholes. That’s what kills exhaust performance and pulls street-side dust in from Broadway.
- Clogged street-facing intake louvers. Fall leaf litter and winter road-salt dust get drawn through louvers on the parkway side of a building and stress the joints in the supply and return ducts around the air handler and blower motor.
- Dryer vents sharing a stack. Many Inwood buildings route dryer exhaust through a common vertical stack. Lint accumulates in that shared run, and a clogged stack is a fire risk, not just a weak dryer.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Repair & Sealing in Inwood, NY
Here’s roughly what this work runs in the Inwood market, based on the size and condition of the system. A typical duct sealing job in an Inwood apartment runs $350 – $800. Metal duct repair, including opening a chase and reconnecting a riser section, usually runs $450 – $1,200. Flex duct repair runs $200 – $450 per failed run. Duct insulation runs $300 – $700 for the affected sections. A camera inspection to confirm what’s actually wrong is part of the estimate, which is free.
Cost moves with access more than anything else: a chase in a six-story walk-up takes more time than a basement trunk line. The condition of the fire damper and whether the shared stack needs isolating also affect the scope. You get one flat price per system agreed before work starts, and the written estimate sets the final price.
We Also Serve Cities Near Inwood
Our duct repair & sealing team covers the neighborhoods around Inwood, including University Heights, Kingsbridge, Spuyten Duyvil, and Washington Heights. If you’re just across the boundary in one of those areas, the process is the same: camera inspection, a written price, and sealing done before we leave. You can read more about how we work in Inwood on the city page, or jump straight to our duct repair & sealing service overview.
Serving Inwood, NY – Our Local Coverage Area
We serve Inwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Inwood
It’s usually a duct repair issue, not a cleaning issue. If cleaning fixed it, the dust would stay gone. When grease dust returns to the cabinets and the exhaust stays weak at the register, a camera inspection typically finds failed seams or a disconnected joint in the original galvanized riser, and the fix is sealing or metal repair. Call (844) 702-0856 for a free estimate.
Yes, it can, and that’s exactly why the shared stack gets isolated first. In a walk-up where one riser serves several apartments, repairing a joint changes draft and airflow for the units above and below. We set negative pressure with HEPA filtration and isolate the stack before work starts so neighbors don’t get a surge of dust through their registers. Call (844) 702-0856 to talk through your building.
Plan for access to be the slow part, not the repair itself. Parking near Broadway and the side streets is tight, so we coordinate where equipment gets staged before the day of the job, and everything runs through a service entrance or stairwell rather than sitting on the street. Inside, the work is contained with Abatement Technologies filtration while we’re in the chase, and you get before-and-after photos of your ducts when we’re done. Call (844) 702-0856 for an exact quote.
It usually needs both, and the repair piece is easy to skip. Shared dryer stacks collect lint through the whole vertical run, and joints that have separated let that lint escape into the shaft. Cleaning without repairing the seams means the problem comes back. Dryer vent work is a core service for us, not an add-on. Call (844) 702-0856 for a free estimate.
A camera inspection answers that, and it’s the first thing we do. Mastic sealant handles seam separation and pinhole leaks in ductwork that’s still structurally sound, which covers a lot of Inwood’s original tin runs. Full metal repair is for sections that are crushed, disconnected, or corroded through. You see the footage before anything is priced. Call (844) 702-0856 and we’ll get you scheduled.
Get Your Inwood Ductwork Sealed and Checked
Weak exhaust, returning dust, and a dryer that takes two cycles to finish are all signs the ducts need more than a cleaning. We’ll inspect your system, isolate any shared stack, repair the failed joints with mastic or new metal as needed, check the fire damper, and photograph the results. Call (844) 702-0856 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Bedford Park.